beautypg.com

Washer fluid, Automatic transmission with steptronic – BMW 760Li Sedan 2010 User Manual

Page 71

background image

Fold-out position of the wipers

Required when changing the wiper blades or
under frosty conditions, for example.

1.

Switch off the ignition.

2.

Under frosty conditions, ensure that the
wiper blades are not frozen onto the wind‐
shield.

3.

Press the wiper lever up beyond the point of
resistance and hold it for approx. 3 seconds,
until the wiper remains in a nearly vertical
position.

After the wipers are folded back down, the

wiper

system, refer to page 69,

must be reactivated.

Fold the wipers back down
Before switching the ignition on, fold the

wipers back down to the windshield; otherwise,
the wipers may become damaged when they are
switched on.◀

1.

Switch on the ignition.

2.

Press the wiper levers down. The wipers
move to their resting position and are ready
for operation.

Washer fluid

General information

Antifreeze for washer fluid
Antifreeze is flammable. Therefore, keep

it away from sources of ignition.
Only keep it in the closed original container and
inaccessible to children.
Follow the instructions on the container.◀

Container for washer fluid

Adding washer fluid
Only add washer fluid when the engine is

cool and then close the cover completely to
avoid contact between the washer fluid and hot
engine parts.
Otherwise, there is the danger of fire and a risk
to personal safety if the fluid is spilled.◀

All washer nozzles are supplied from one reser‐
voir.
Fill with water and – if required – with a washer
antifreeze, according to the manufacturer's rec‐
ommendations.
Mix the washer fluid before adding to maintain
the correct mixing ratio.

Capacity

Approx. 5.3 US quarts/ 5 liters

Automatic transmission with

Steptronic

Transmission positions

D Drive, automatic position

Position for normal vehicle operation. All for‐
ward gears are available.

R is Reverse

Select only when the vehicle is stationary.

N is Neutral

Use in automatic car washes, for example. The
vehicle can roll.
When the

ignition is switched off, refer to

page 64,

position P is engaged automatically.

P Park

Select only when the vehicle is stationary. The
drive wheels are blocked.
P is engaged automatically:

After the engine is switched off, if the car is
in

radio ready state, refer to page 64,

or if

the

Seite 71

71

Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG

Reference

Mobility

Communication

Entertainment

Navigation

Driving tips

Controls

At a glance

This manual is related to the following products: