High-beam assistant, High-beam assistant* 87 – BMW 760Li Sedan 2010 User Manual

Page 87

The turning lamps are automatically switched
on depending on the steering angle or the use
of turn signals.
To avoid blinding oncoming traffic, the adaptive
light control directs light towards the front pas‐
senger side when the vehicle is at a standstill.
When driving in reverse, only the turning lamp is
active and illuminates the outside of the curve.

Self-leveling headlights

The self-leveling headlights feature adapts the
light distribution to the contours of the road.
The light distribution is lowered on hilltops to
avoid blinding oncoming traffic and raised in de‐
pressions to increase visibility.

Malfunction

A message is displayed.
Adaptive light control is malfunctioning or has
failed. Have the system checked as soon as pos‐
sible.

High-beam assistant*

The concept

When the lights are switched on, this system
automatically switches the high beams on and
off. The procedure is controlled by a sensor on
the front of the interior rearview mirror. The as‐
sistant ensures that the high beams are
switched on whenever the traffic situation al‐
lows. The driver can intervene at any time and
switch the high beams on and off as usual.

Activating the high-beam assistant

Turn the light switch to position

Press the button on the turn signal lever, ar‐
row.

The indicator lamp in the instrument
cluster lights up.
When the lights are switched on, the

high beams are switched on and off automati‐
cally.
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to ad‐
equate illumination, e.g., in towns and cities.

Switching the high beams on and off

manually

▷

High beams on, arrow 1.

▷

High beams off/headlamp flasher, arrow 2.

To reactivate the high-beam assistant, press the
button on the turn signal lever.

System limits

Personal responsibility
The high-beam assistant cannot serve as

a substitute for the driver's personal judgment
of when to use the high beams. Therefore, man‐
ually switch off the high beams in situations
where this is required to avoid a safety risk.◀
The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:

▷

In very unfavorable weather conditions,
such as fog or heavy precipitation.

▷

In detecting poorly-lit road users, such as
pedestrians, cyclists, horseback riders and

Seite 87