If pdc is displayed, switch on the, Backup cam – BMW 760Li Sedan 2010 User Manual
Page 119
Turning circle lines
▷
Can be shown in the backup camera image.
▷
Show the course of the smallest possible
turning circle on a level road.
▷
Only one turning circle line is displayed
when the steering wheel is turned.
Show the parking aid lines via the iDrive, refer to
page 119
.
Parking using pathway and turning
circle lines
1.
Position the vehicle so that the turning circle
lines lead to within the limits of the parking
space.
2.
Turn the steering wheel to the point where
the pathway line covers the corresponding
turning circle line.
Obstacle marking
▷
Spatially-shaped markings can be shown in
the backup camera image.
Their colored steps match the markings of the
PDC. This simplifies estimation of the distance
to the object shown.
Activating the assistance functions
More than one assistance function can be active
at the same time.
Showing the parking aid lines
1.
"Parking aid lines" Select the symbol.
2.
Press the controller.
Pathway and turning circle lines are displayed.
Showing the obstacle marking
1.
"Display obstacle marking" Select the
symbol.
2.
Press the controller.
Spatially-shaped markings are displayed.
Display on the Control Display
Switching on the backup camera via the
iDrive
With PDC activated:
1.
"Switch on rear view camera" Select the
symbol.
2.
Press the controller.
The backup camera image is displayed. The set‐
ting is stored for the remote control currently in
use.
Seite 119
119
Online Edition for Part no. 01 41 2 602 638 - © 09 09 510 BMW AG