Edge Lighting Soft Line indirect LED lighting system, featuring Soft Strip - Manual (Page 2)

2
ANCHOR
OUTRIGGER
STEM HOUSING
#8 SCREW
ANCHOR FOR
STANDOFF POST
WALL
7
5:
6:
Mark the two points 1.2" apart for the standoff post (or use
the base washer as a template to mark the holes), and a
point for the aircraft cable post in line between the standoff.
Using a hammer tap in the anchor on the marked
location up to the threaded portion.
7: Screw in the threaded portion of the anchor with a Phillips
screwdriver.
C
D
8: Mount the aircraft cable post integrated washer-nipple to the
anchor using the #8 screw provided.
9: Mount the standoff post base washer to the anchors using
the two #8 screws provided.
INTEGRATED
WASHER-NIPPLE
#8 SCREW
8
10: Feed the aircraft cable through the cable post and screw
the cable post completely onto the integrated
washer-nipple.
E
AIRCRAFT CABLE
CABLE POST
INTEGRATED
WASHER-NIPPLE
10
F
STANDOFF POST
AIRCRAFT CABLE
11
11: Push the tab on the adjustable standoff post and insert the
aircraft cable.
9
DRYWALL
DRYWALL
11
1.2" APART FOR
STANDOFF POST
6
7
5
ANCHOR FOR
AIRCRAFT CABLE
POST
ADJUSTABLE STANDOFF RING
TOP VIEW
TOP VIEW
NOTE: The base washer hole should be inline with direction of
the softline.