Edge Lighting Vega Round - Manual (Page 4)

Install the Lamps and Shade
J
1: Screw each lamp completely into the socket holes.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
Use MAX 150 Watt Type T10 Medium Base
Halogen Lamp For Each Socket.
SOCKET
LAMP
K
GLASS RING
HOLDER
GLASS SHADE
2: Insert the glass ring holder on an angle into the glass shade
center hole and lay the glass shade on the glass ring holder.
L
GLASS SHADE GLASS RING
HOLDER
3: To secure the glass shade in place, use the hooks inside the
glass shade and hook them inside of the glass ring holder.
4: Lower the socket assembly into the glass shade.
HOOK
1
2
3
4
5: If the glass shade is not leveled horizontally, slide the cover
plate down to expose the mounting plate.
6: Readjust the uneven aircraft cable by loosening the set
screw on the strain relief bushing with the 1.5mm Allen
wrench. Push the aircraft cable in and re-tighten the set
screw.
7: Slide the cover plate up against the mounting plate.
M
1.5MM ALLEN
WRENCH
STRAIN
RELIEF
BUSHING
CORD GRIP
CLEAR CORD
COVER PLATE AIRCRAFT
CABLE
4
3