Edge Lighting Graciano User Manual
Graciano suspension, Install the fixture, Installation instructions for

SAVE THESE INSTRUCTIONS!
- This product is suitable for indoor locations.
- This product can mount to either a 4" square electrical box
with round plaster ring or an octagon electrical box.
- This product is dimmable with a standard incandescent
dimmer.
IMPORTANT INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
Install the fixture
To reduce the risk of fire, electrical shock, exposure to
excessive UV radiation, or injury to persons:
- Do not look directly at the lamp while the fixture is on.
- RISK OF FIRE: Use only the type of lamp and maximum
wattage indicated in this instruction manual.
- Never cover the halogen lamp with anything other than a
lamp shield provided by Edge Lighting and never place
flammable material close to the fixture.
- Never turn the fixture on and off by connecting and
disconnecting the halogen lamp.
- Do not touch the fixture head, shade or lamp shield while
the fixture is on. These surfaces may be VERY HOT.
- Do not touch lamp at anytime. Use a soft cloth instead as oil
from skin may damage lamp.
- It is normal for a new halogen lamp to produce minor
smoke when first turned on.
- Do not operate the luminaire with a missing or damaged
shield.
- Turn power off and allow to cool before replacing lamp.
A
H
CANOPY
1: Determine the desired fixture height (H), from the bottom of
the glass ornaments to the top of the canopy.
Installation Instructions for
Graciano Suspension
904-GRACIANO-02
GRACIANO-S-_
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
© 2010 Edge Lighting. All Rights Reserved.
1
B
2: Slide the canopy up and down by pushing the tab on the
aircraft cable grip until desired height is achieved. Release
the tab to lock the aircraft cable in place.
Loosen the M4 set screws on both sides of the strain
relief with the 2mm Allen wrench.
Pull the end of the aircraft cable out of one strain relief hole.
Slide the strain relief down the aircraft cable behind the cable
grip.
3:
4:
CLEAR CORD
SOCKET HOUSING
CORD GRIP
CANOPY
AIRCRAFT CABLE
STRAIN
RELIEF
SET
SCREW
AIRCRAFT
CABLE
2
CABLE GRIP
CABLE
GRIP
1
3
GLASS
ORNAMENT
4
12"