Dynalco SC-2124M Scanner/Monitor User Manual
Page 57
56
/*$PAGE*/
; ************ AI CHANNEL #01 *************
;
; AI CH NAME ******************************
; User-defined alphanumeric channel name up
; to 11 characters in length. If configured
; for BLANK name, then Ch # will be displayed
; on Custom Screens instead of Ch Name.
;
;
110.1=
; AI CH INPUT TYPE ************************
; 0 J-TC (dflt)
; 1 K-TC
; 2 Nickel RTD
; 3 Platinum RTD
; 4 4-20 mA (Note: 4-20 mA inputs supported
; on SCANNER Ch #s 1-8 ONLY.
; Corresponding on-board
; dip-switch (SW1) MUST be
; turned ON)
; 5 0-5 V
8001.1=0
; AI CH ENABLE ****************************
; 0 Disabled (dflt)
; 1 Enabled
8000.1=0
; AI CH UNITS *****************************
; 0 Deg F (dflt)
; 1 Deg C
; 2 PSI
; 3 PSA
; 4 KPA
; 5 FTP (Foot-Pounds)
; 6 RPM
; 7 " "
111.1=0
; TEMPERATURE READING IN DEGREES CELSIUS OR FAHRENHEIT
; 0 Deg F (dflt)
; 1 Deg C
65425=0