Dynalco SC-2124M Scanner/Monitor - Manual (Page 26)

26
Scan Screen Settings
P a r a m e t e r D e s c r i p t i o n V a l i d I n p u t s
195= Selects type of scan screen to view (default or 0= displays default screen (enabled channels
custom) shown one at a time)
1= displays custom screen (shows up to 4
channels on one screen)
140= Define time between scan screens Minimum= 2 seconds
Default= 3 seconds
Maximum=10 seconds
141= Change the time it takes to return to the main 0= off
scanner screen after no key press activity 1= 1 minute (default)
2 = 2 mi n ut es 3 = 3
m i n u tes 4= 4
m i n u tes 5= 5
minutes
170= Select the scanner channel or node to display 0= display scanner channel number [‘CHXX’]
(default)
1= display scanner node number [‘N:XX’]
C u s t o m S c r e e n S e t t i n g s
Parameter Defines the analog input channel to display on: Valid Input:
190.1= Screen 1, Line 1 0 = off (default)
190.2= Screen 1, Line 2 1 to 24= analog input channel
190.3= Screen 1, Line 3
190.4= Screen 1, Line 4
190.5= Screen 2, Line 1
190.6= Screen 2, Line 2
190.7= Screen 2, Line 3
190.8= Screen 2, Line 4
190.9= Screen 3, Line 1
190.10= Screen 3, Line 2
190.11= Screen 3, Line 3
190.12= Screen 3, Line 4
190.13= Screen 4, Line 1
190.14= Screen 4, Line 2
190.15= Screen 4, Line 3
190.16= Screen 4, Line 4
190.17= Screen 5, Line 1
190.18= Screen 5, Line 2
190.19= Screen 5, Line 3
190.20= Screen 5, Line 4
190.21= Screen 6, Line 1
190.22= Screen 6, Line 2
190.23= Screen 6, Line 3
190.24= Screen 6, Line 4