Canon PowerShot G12 - Manual (Page 93)

Changing the AF Frame Position and Size
93
FlexiZone/Center
A single AF frame will be used. This is effective for focusing on a specific point.
In [FlexiZone], you can change the position and size of the AF frame (p. 93).
When the AF frame mode is set to [FlexiZone] (see above) you can change
the position and size of the AF frame.
Press the button.
X The AF frame will turn orange.
Move the AF frame.
● Turn the ÷ or Ê dial.
● Press the opqr buttons to make fine
adjustments.
● When faces are detected, each press of
the
n button will move the AF frame
to another face.
● If you keep the button pressed, the AF
frame will return to the original position
(center).
Change the AF frame size.
● Press the l button.
X The AF frame will become small.
● Pressing the l button again will
restore the AF frame to normal size.
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow and
will appear.
Changing the AF Frame Position and Size
COP
Y