Cop y – Canon PowerShot G12 User Manual
Page 17
Inserting the Battery and Memory Card
17
Insert the memory card.
●
Insert the memory card as shown until it
locks into place with a click.
●
Be sure the memory card is oriented
correctly. Inserting the memory card in the
wrong direction could damage the camera.
Close the cover.
●
Close the cover (
), and press downward
as you slide it until it clicks into place (
).
Removing the Battery and Memory Card
Remove the battery.
●
Open the cover and press the battery lock
in the direction of the arrow.
X
The battery will pop up.
Remove the memory card.
●
Push the memory card in until you hear a
click, then slowly release it.
X
The memory card will pop up.
Approximate Number of Shots per Memory Card
•
Values are based on the default settings.
•
The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Label
What if [Memory card locked] appears on the screen?
SD, SDHC and SDXC memory cards, and Eye-Fi cards have a write-protect tab.
If this tab is in the locked position, [Memory card locked] will appear on the screen
and you will not be able to take or erase images.
Memory Card
4 GB
16 GB
Number of Shots
1471
6026
COP
Y