Trimming, Cop y – Canon PowerShot G12 User Manual

Page 147

147

You can cut out a portion of a recorded image and save it as a new image file.

Choose [Trimming].

●

Press the

n button to choose

[Trimming] in the

1 tab, then press the m

button.

Choose an image.

●

Press the

qr buttons or turn the Ê dial to

choose an image, then press the

button.

Adjust the trimming area.

A frame will appear around the portion of
the image to be trimmed.

The original image will display in the upper
left and the trimmed image will display in
the lower right.

●

If you move the zoom lever to the left or
right, you can change the frame size.

●

If you press the

opqr buttons, you can

move the frame.

●

If you press the

l button, you can

change the frame orientation.

●

In an image with detected faces, gray
frames appear around the faces located in
the upper left image. The frames can be
used for trimming. You can switch between
frames by turning the

Ê dial.

●

Press the

m button.

Save as a new image and display.

●

Follow Steps 4 and 5 on p. 146.

Trimming

Trimming Area

Trimming Area Display

Recorded pixels
after trimming

COP