Cop y – Canon PowerShot G12 User Manual

Page 189

Using an Eye-Fi Card

189

Checking Connection Information

You can check the Eye-Fi card’s access point SSID, or connection status.

Choose [Connection info].

●

Press the

n button, then choose

[Eye-Fi Settings] from the

3 tab, and

press the

m button.

●

Press the

op buttons or turn the Ê dial

to choose [Connection info], then press the
m button.

The Connection info screen will appear.

Disabling Eye-Fi Transfer

You can set the card to disable Eye-Fi transfer.

Choose [Disable] in [Eye-Fi trans.].

●

Press the

n button to choose [Eye-Fi

Settings] from the

3 tab, then press the

m button.

●

Press the

op buttons or turn the Ê dial

to choose [Eye-Fi trans.], then press the
qr buttons to choose [Disable].

The power saving function does not work while transferring images (p. 53).

If the Eye-Fi card has a write-protect tab, you will not be able to check the
card’s connection status, or set [Eye-Fi trans.] to [Disable] when the tab is
in the locked position.

What if [Eye-Fi Settings] does not appear?

[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.

COP