Adjusting the flash output checking for shut eyes, Cop y, Adjusting the flash output – Canon PowerShot G12 User Manual

Page 111: Checking for shut eyes

111

D mode, you can choose 3 levels of flash output.

Set the mode dial to

Choose the level of flash output.

●

After pressing the

r button, immediately

turn the

÷ dial to choose the level of

output, then press the

m button.

Once set,

~ will appear on the screen.

When the camera detects the possibility that people have their eyes shut,

appears.

Choose [Blink Detection].

●

Press the

n button, then choose

[Blink Detection] in the

4 tab. Press the

qr buttons to choose [On].

Shoot.

When a person with shut eyes is detected,
a frame and

appear.

Adjusting the Flash Output

You can also set the flash output with the following methods. However, it
cannot be set with the

r button when an external flash (sold separately) is

attached. In this case, set the flash output using methods with an asterisk *.

•

After pressing the

m button, press the op buttons to choose ~, then press

the

qr buttons or turn the Ê dial. *

•

Press the

n button and choose [Flash Control] from the 4 tab. Then

choose [Flash Output] and press the

qr buttons.*

•

Press the

r button, then the n button, or press and hold the r button

for more than 1 second, and the setting screen will appear. Choose [Flash
Output], then press the

qr buttons.

Checking for Shut Eyes

COP