Cop y – Canon PowerShot G12 User Manual

Page 128

Viewing Images in Filtered Playback

128

Jump by and Images

●

In single image playback, press the

button, then press the

op buttons to

choose a jump method.

●

If you press the

qr buttons, the display

will advance to the image that is the
chosen number of images away.

●

Pressing the

n button restores single

image playback.

Using the Front Dial to Jump

Turn the front dial to jump images by

, and

●

In single image playback, turn the

÷ dial,

then press the

op buttons to choose a

jump method.

●

If you turn the

÷ dial, the display will

advance to the image by the chosen jump
method.

What if you can’t choose a filter?

Filters that do not have any corresponding images cannot be chosen.

Filtered playback

In filtered playback (Step 2), you can view filtered images with “Quickly Searching
Images” (p. 126), “Viewing Slideshows” (p. 129), and “Magnifying Images”
(p. 131). You can process all filtered images at once while performing operations
in “Protecting Images” (p. 136), “Erasing All Images” (p. 140), or “Choosing
Images for Printing (DPOF)” (p. 155), by choosing all of the filtered images.
However, if you change the category (p. 143), or edit an image and save it as a
new image (p. 146), a message will appear, and filtered playback will cancel.

Turning the

dial in index playback will advance the images according

to the jump method chosen during single image playback. However, if you
chose

, the jump method will switch to

COP