Canon PowerShot G12 - Manual (Page 102)

102
Just as with the AE lock (p. 101), you can lock the exposure for shooting with
the flash. FE stands for “Flash Exposure”.
Choose h (p. 77).
Lock the flash exposure.
● Point the camera toward the subject and
press the
¤ button.
X The flash will fire and when ¤ appears, the
flash output will be retained.
● When you shoot one image, ¤ will
disappear and FE will unlock.
Compose the scene and shoot.
The camera takes 3 continuous shots while automatically adjusting the exposure
to standard exposure, underexposure and overexposure, in that order.
Choose .
● After pressing the m button, press the op
buttons to choose , then press the qr
buttons or turn the Ê dial to choose .
Set the exposure compensation
amount.
● Press the l button.
● Press the qr buttons or turn the Ê dial to
adjust the setting.
● From the exposure set by the camera, you
can adjust the amount of compensation ±2
stops in 1/3-stop increments. If exposure
compensation (p. 76) is already being
used, settings are made with the
compensated value as the base.
Shooting with the FE Lock
Auto Exposure Bracketing (AEB Mode)
COP
Y