Canon PowerShot G12 - Manual (Page 171)

Changing Shooting Function Settings
171
Changing the IS-Mode Settings
● Choose [IS Mode], then press the qr
buttons to choose an option.
Registering Functions to the Front Dial and
Control Dial
You can register commonly used functions to the front dial and the control dial
for each Shooting mode.
● Choose [Set ÷Ê Func.], then press the
m button.
● Press the qr buttons to choose an option.
● When making settings, press the op
buttons, then press the opqr buttons,
or turn the Ê dial to choose an item, and
turn the ÷ dial to change the function.
Continuous
Image stabilization is always on.
You can confirm the effects directly
on the display, which makes it
easier to check the composition or
focus. It not only reduces angular
blur, but also reduces lateral shift
blur (hybrid IS) common to macro
photography.
Shoot Only*
Image stabilization is only active
at the moment of shooting.
Panning*
Image stabilization only counters
up and down motion. This option
is recommended for shooting
objects moving horizontally.
* Setting changes to [Continuous] when shooting
movies.
• If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
• When using [Panning], hold the camera horizontally to shoot. Image
stabilization does not work when the camera is held vertically.
COP
Y