Cooper Instruments & Systems DFI Infinity CS Economy Digital Indicator - Manual (Page 34)

DFI INFINITY CS (V- M3598/N/0906) 31 CF 70
9.0 FACTORY PRESET VALUES
Table 9-1 Factory Preset Values
MENU ITEM FACTORY PRESET VALUES
Input Type: 0-100 (0-100 mV input)
Decimal Point Position:
Reading Scale and Offset:
0-100 mV = 0-1000
Reading Configuration:
(Ratiometric)
(10µV resolution for unipolar & 25 µV resolution for
bipolar)
(Filtered value)
(Gross/net reading)
Normal Color Display:
or (Note: depending how unit was ordered)
Setpoint 1 Configuration:
(Setpoint is active above)
(Setpoint is unlatched)
(Net Reading)
Setpoint 2 Configuration:
(Setpoint is active above)
(Setpoint is unlatched)
(Net Reading)
Setpoint 1 Deadband:
Setpoint 2 Deadband:
Output Configuration:
(Analog output is enabled)
(Analog output is current)
(Analog output follows the Net value)
Output Scale and Offset:
0-1000 = 4-20 mA DC
Lock Out Configuration
(Enable the RESET button in the Run Mode)
(Enable setpoint changes)
(Display setpoint values)
(Brightness Level)
Setpoint 1 Value:
Setpoint 2 Value:
Sensor Excitation: 10Vdc
10.0 CE APPROVALS INFORMATION
This product conforms to the EMC directive 89/336/EEC amended by 93/68/EEC, and with the European Low
Voltage Directive 72/23/EEC.
Electrical Safety EN61010-1:2001
Safety requirements for electrical equipment for measurement, control and laboratory.
Double Insulation
Pollution Degree 2
Dielectric withstand Test per 1 min