Cooper Instruments & Systems DFI Infinity CS Economy Digital Indicator - Manual (Page 30)

DFI INFINITY CS (V- M3598/N/0906) 27 CF 70
MENU
X/TARE S/NT/GRS
0.1 = (Analog output is enabled)
(Analog output is disabled)
0.2 = (Analog output is current)
(Analog output is voltage)
Output Configuration
0.3 = (Net Reading)
(Gross Reading)
Output Scale & Offset
(Shown if in Output
Configuration Menu )
1
Show
Shows prior value
entered and flashing digit.
Scrolls to the next digit
Changes the value of the flashing digit.
2
Enter new value and
show
.
3
Shows prior value
entered and flashing digit.
Scrolls to the next digit.
Changes the value of the flashing digit.
4
Enter new value and
show
.
5
Shows prior value
entered and flashing digit.
Scrolls to the next digit.
Changes the value of the flashing digit.
6 Enter new value and
show
.
7 Shows prior value
entered and flashing digit.
Scrolls to the next digit.
Changes the value of the flashing digit.
RS = (Enable RESET button in the Run Mode)
(Disable RESET button in the Run Mode)
SP = (Enable setpoint changes)
(Disable setpoint changes)
Lock Out Configuration
L3 = (SETPTS button display setpoint values)
(SETPTS button display firmware version
where 8 is 0 ~ 9)
Brightness Configuration Shows input choices: (Medium Brightness)
(Low Brightness)
(High Brightness)