Bio-Rad Image Lab™ Software - Manual (Page 218)

B | Troubleshooting
218 | ChemiDoc MP Imaging System with Image Lab Software
Printout does not
look like the monitor
image  The monitor settings are
wrong.
 The printer settings are
wrong.
 See your monitor manual for the
appropriate settings.
 See your printer manual for the
appropriate settings.
Light leakage into the
darkroom  The lens body is not
seated properly against
the gasket on the hood’s
adapter plate.  Loosen the thumbscrew and seat the
lens properly against the gasket on
the hood’s adapter plate.
Unable to focus on
the sample using
white light
transilluminator or
conversion screen  Focus is not calibrated
for samples using this
light source.  Select Edit > Instrument Setup to
recalibrate the focus for use with this
accessory.
Lens limits seem
artificially restricted  The camera lens is not
seated properly on the
lens mounting plate.  Re-seat the camera on the lens
mounting plate.
Problem Possible Cause Solution