Bio-Rad Image Lab™ Software - Manual (Page 12)

| Safety and Regulatory Compliance
12 | ChemiDoc MP Imaging System with Image Lab Software
Warranty
The ChemiDoc MP imaging system is warranted against defects in materials and
workmanship for one year. If any defect occurs in the instrument during this
warranty period, Bio-Rad Laboratories, Inc. will repair or replace the defective parts
at its discretion without charge. The following defects, however, are specifically
excluded:
 Defects caused by improper operation
 Repair or modification done by anyone other than Bio-Rad Laboratories,
Inc. or the company’s authorized agent
 Use of spare parts supplied by anyone other than Bio-Rad Laboratories,
Inc.
 Damage caused by accident or misuse
 Damage caused by disaster
 Corrosion caused by improper solvents or samples
General Precautions
 Read the user guide carefully.
 The instrument must be used only for the intended purpose of gel
documentation in research laboratories.
 The instrument must be connected to a grounded power source line and
protected by a circuit breaker.
 Do not pour liquids directly on or inside the instrument.
 Switch off all lights on the instrument immediately after use.
 Clean the transilluminator sample area after use.