B&G H2000 Pilot *DISCONTINUED* User Manual
Page 99
HB-0844-04
4-3
PART 4 - INSTALLATION INFORMATION
4.1
INTRODUCTION
This part of the manual contains information relating to the interconnection of
the units that make up the Hydra 2000 System. It is provided to enable a
qualified technician to fault find or undertake the installation of additional units
and thereby increase the number of functions available.
The information provided consists of drawing sheets showing equipment
options and the interconnections between them. Also on the installation data
sheets are details of cables, cable colours, instructions for installation and
notes to assist the technician.
The installation sheets following are:
1. Sonic Speed Unit and Sonic Transducers
2. Depth Transducer, Sonic Speed and Sea Temperature
3. Multiple Linear Sensor Inputs
4. Analogue Meters
5. Alarm Unit, Network and Power Supply
6. Network Terminator
7. Super Halcyon 3 and 213 Masthead Unit
8. Twin XTL Fins Gravity Switch
9. Change-over Switch
10. Hydra System Example Reference
11. Depth Transducer and Paddle/Sea Temperature Sensor
12. Clinometer and Barometric Pressure Sensor
13. NMEA Full Function Display
14. Non-NMEA Full Function Display
15. Halcyon 2000 Compass
Note
All cable screens should be connected under the metal clamp bar located on
the processor case.