B&G H2000 Pilot *DISCONTINUED* - Manual (Page 28)

HB-0844-04
2-9
Notes
1. If you become lost in the system, press the Page Key and you will
immediately return to the top level display without doing any damage.
2. Successive operations of the Page Key will bring up each of the user
defined pages in rotation.
3. The four initial pages can be reconfigured to meet your specific needs, as
described in Para 2.5.2
4. Holding down the Page Key for two seconds initiates control of 20/20
displays (see Part 5 - Options).
2.1.4
Scroll Keys
Two scroll keys are provided: Scroll Up and Scroll Down. The scroll keys
have three functions:
1. Select the upper or lower display to change functions.
2. To scroll through (select) the menu choices.
3. To increase or decrease numerical values, such as calibration
values.
Immediately after a specific page has been selected, pressing the Scroll
Up Key will select the upper display. Similarly, operation of the Scroll Down
Key will select the lower display.
2.1.5
Enter/Reset Key
The principle use of the Enter Key, is to make selections chosen from the
menu by the scroll keys. As a general guide when any menu choice is
flashing, pressing the Enter Key will select that choice. It is also used to:
Enter Data. When the value on the display needs changing it is
altered by pressing the Enter Key. This starts the selected value
flashing. Next using the Scroll Up or Scroll Down Keys, change it
to the required value. Press the Enter Key again to complete the
operation.
Accept and Reset Alarms. When an alarm sounds (if the audible
warning is fitted) or flashes at the FFD, two presses of the Enter
Key stops the warning and resets the alarm.