B&G H2000 Pilot *DISCONTINUED* - Manual (Page 154)

HB-0844-04
6-12
6.4 ERROR MESSAGES
6.4.1
Error Messages
Following is a list of error messages output on the displays.
Er01 Error detected reading the analogue to digital
converter on the depth sounder board. This can be an
indication of a fault on the board or that the sea water
temperature or the compass signals are outside their
normal range. Try disconnecting the sensors in turn.
Er02
Error detected when writing to the analogue to digital
converter on the depth sounder board. This can
indicate the same problems as Er01.
Err.3
Syntax or parity error on received NMEA data.
Err.4
Checksum error on received NMEA 0183 data.
CAL
Alternating with a function value indicates that it has
yet to be calibrated. This will happen after a system
reset or if the internal battery is exhausted.
NO SPACE FFD memory full, too many functions have been
declared.
NOT FOUND New function declared without text.