B&G H2000 Pilot *DISCONTINUED* - Manual (Page 156)

HB-0844-04
6-14
6.5.4 Two Headings Flashing Alternately
Symptom: Pilot or Halcyon Displays shows two headings flashing alternately
Possible Cause:
The Pilot has not been set to use the Halcyon 2000 as its heading
source. Pilot Heading Node must be set to Node 16. If the Halcyon
2000 is not to be the source of heading then it must be unplugged
from the network.
6.5.5
True Wind Direction, Tide Set or DR Course Not Functioning
Correctly
Symptom: True Wind Direction, Tide Set and DR Course functions are
inoperative
Possible Cause:
The Main Processor has not been set to use the Halcyon 2000 as
the heading source. Set NAVIGATE
→
COURSE, CAL VAL 1 (HDG
NODE) to 16.