B&G H2000 Pilot *DISCONTINUED* - Manual (Page 126)

HB-0844-04
5-9
5.3.3 Meter Scaling
Meter scaling can also be varied for boat speed and wind speed. For
example if a 25 knot full scale Boat Speed Meter is required, this can be
done as follows:
(1) Follow steps (1) and (2) as detailed in Para 5.3.3.
(2) With OPTIONS flashing, press Scroll Up to reveal SCALING
and press Enter, BOAT SPD will appear. A further press of Enter
will reveal the current maximum meter scale value for the Boat
Speed Meter.
(3) To change this (e.g. to 25 knots) press Enter and then Scroll
Up to increase the number to 25.0. A final press of Enter will then
enter the new maximum scale. The Boat Speed Meter will read
between 0 and 25 knots.
(4) Press Page to return to normal operation.
5.4
GRAVITY SWITCH
In installations where two speed sensors or depth transducers are fitted a
gravity change over switch can be fitted to automatically select the leeward
sensor. A switch on the outside of the unit over rides the automatic selection
if required, for example when calibrating the individual speed sensors.
5.5
AUDIBLE ALARM
The Main Processor contains a relay switch for an external audible alarm if
required.