B&G H2000 Pilot *DISCONTINUED* - Manual (Page 40)

HB-0844-04
2-21
minute gun. The Timer will count down to zero and then begin to
count up giving the time since the start.
(5) Press the Page Key to return to the normal display.
2.8.3 Reset Trip Log
(1) Display TRIP LOG in the upper display.
(2) Press Scroll Down once and the lower text now shows
CONTROL flashing.
(3) Press Enter and use the Scroll Down key to display RESET
flashing.
(4) Press the Enter key and the display now shows RUN flashing.
(5) Press the Enter key again and the display shows the trip log
running.
(6) Press the Page key to resume normal operation.
Note
Every time you reset the TRIP LOG the AVERAGE SPEED resets and
begins its calculation again. The control facility for the Dead Reckoned
functions work in the same way; the bearing and distance are linked, so that
they are started simultaneously.
2.9
LIGHTING CONTROL
The level of illumination at system displays is controlled by the Power/Lights
Key. Use of this key normally controls all the Hydra displays simultaneously.
However, the level of illumination on a single FFD can be controlled
individually using the menu choice - LIGHTING - LOCAL.
2.9.1
Select Local Control
(1) Press and hold Scroll Up or Scroll Down until LIGHTING
appears in the text.
(2) Press Enter, Scroll Down until LOCAL appears in the text.