B&G H2000 Pilot *DISCONTINUED* - Manual (Page 10)

HB-0844-04
1-5
Resettable Log
Dead Reckoned Course and Distance
Leeway
Heading Corrected for Leeway (Course)
True Wind Speed
True Wind Angle
True Wind Direction
Heading on Next Tack or Gybe
Pressure Trend
In addition, the processor provides four outputs for analogue indicators. Any
one of eight different types of analogue indicator can be used on any one of
these outputs.
It also contains the battery backed memory that stores all the calibration,
damping and alarm settings whilst the power is OFF. These are adjustable
from any FFD.
1.2.2 Expansion Unit
The Expansion Unit allows a further four analogue indicators and a number of
additional sensors to be added to the system. Further details are given in
Part 5 - Options.
1.2.3 Halcyon Gyro Processor
The Halcyon Gyro Processor Unit is an interface between the Halcyon Gyro
Stabilised Compass and the B&G Fastnet Network. It also outputs NMEA
heading information for use with other marine instruments and AD10 for use
with Radar.
The Halcyon Gyro Processor accepts NMEA data from your position fixer for
magnetic variation information to allow display and output of True referenced
heading.
The Halcyon Gyro Processor can also be used as an interface to either
output NMEA heading and AD10 from a B&G system compass, or to accept
True heading NMEA information from a gyro compass to output and display
on a B&G system, along with AD10 and NMEA outputs.
Full details are given in Part 3 – Calibration.
1.3
SENSORS