Great Plains PFC2000 Operator Manual - Manual (Page 43)

Maintenance and Lubrication 41
03/28/2007 407-158M
Maintenance and Lubrication
Maintenance
Proper servicing and maintenance is the key to long
implement life. With careful and systematic inspection,
you can avoid costly maintenance, downtime, and
repair.
!
CAUTION
The line from the pump outlet, through the pump strainer,
manifold through gauge line #5 to gauge on the planter may
be pressurized even when not pumping. Open any connec-
tions on this line slowly to avoid spraying.
Always turn off and remove the tractor key before mak-
ing any adjustments or performing any maintenance
when hitched.
1. After using your cart for several hours, check all
bolts to be sure they are tight.
2. Remove excess slack from chain. Clean and use
chain lube on all roller chains as needed.
3. Maintain proper air pressure in cart tires.
4. Clean cart on a regular basis. Regular and thor-
ough cleaning will lengthen equipment life and
reduce maintenance and repair.
5. Lubricate areas listed under “Lubrication” on
page 93.
6. Replace any worn, damaged, or illegible safety
labels by obtaining new labels from your Great
Plains dealer.
OFF