Making fertilizer connections – Great Plains PFC2000 Operator Manual User Manual
Page 18

16
407-158M
03/28/2007
Making Fertilizer Connections
1.
Wear chemical gloves and protective apparel.
2.
Close all shut-off valves on hoses and inlets.
3.
Clean any debris from outlets and inlets.
4.
Make hose connections as shown in the table
above.
5.
Secure any unused hoses as shown in Figure 7.
Fold them back and secure them to the cart
tongue so that the outlet valves point slightly
downward (to prevent collecting the dust thrown up
during normal planter operation).
6.
Do not re-open connection valves until ready to
plant, and cart’s pump selector valve has been set
to desired tank.
PFC2000 Cart, YP2425 Planter with Starter and Hi-rate Manifolds, & Ground Drive Pumps
Cart Hose
Planter Inlet
PFC1600 Cart, YP2425 Planter with Hi-rate Manifold only
Cart Hose
N/A
Planter Inlet
26147
26146
1
2
3
5
6
L
C
R
G
S
1
2
3
5
L
C
R
G
Figure 7
Secure Extra Hoses
26148