Great Plains PFC2000 Operator Manual - Manual (Page 12)

10
407-158M 03/28/2007
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel,
repair parts and equipment specially designed for
Great Plains products.
Refer to Figure 1
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts.
Always use the serial and model number when order-
ing parts from your Great Plains dealer. The serial-
number plate is located on the left end of the seed cart
tool bar, as shown.
Record your PFC1600/2000 Cart model and serial
number here for quick reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part
of this manual or are not satisfied with the service
received, please take the following actions.
1. Discuss the matter with your dealership service
manager. Make sure they are aware of any prob-
lems so they can assist you.
2. If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402-5060
785-823-3276
Figure 1
Serial Number Plate
26016