Great Plains YP1625 Operator Manual - Manual (Page 60)

56 YP1225 and 1625 Great Plains Manufacturing, Inc.
401-226M 07/09/2009
Singulator Plus™ Meter Wheel Replace-
ment
Choose the correct seed meter wheel for the type of
seed you will be using. Be sure to use the same wheel
type on all meters.
IMPORTANT !
Seed meter wheels for the 25 Series row units are
made of a green color material and are not inter-
changeable with the other Great Plains seed meter
wheels for other machines. Use only green wheels in
25 Series row units.
1. Clean out meter. For more information, see “Meter
Removal” on page 54
Refer to Figure 71
2.
Push in spring-loaded wheel retainer and make 1 ⁄
4
turn. Pull off wheel retainer and spring.
Refer to Figure 72
3.
Pry the seed meter wheel out about 1 ⁄
4
inch using the
tool stored under the walkboard, and spin backward
to clean out seeds from top pockets.
Refer to Figure 73
4.
Remove seed meter wheel.
Figure 71
Singulator Wheel Retainer
22911
Figure 72
Pry Meter Wheel
22913
Figure 73
Remove Wheel
25274