Great Plains YP1625 Operator Manual - Manual (Page 101)

Great Plains Manufacturing, Inc. Hydraulic Drive Operating Instructions 97
07/09/2009 401-226M
Refer to Figure 101
6.
Press Function key until the Calibration window
appears as shown.
7. Press up arrow key to enter calibration mode.
Refer to Figure 102
8.
This is the first window that appears in Calibration
mode. Press Function key to accept, or Up key to
change to metric settings.
Refer to Figure 103
9.
Enter drill width here using Up/Down arrow keys.
Press Function key to advance to next window.
Refer to Figure 104
10. Enter number of rows here using Up/Down arrow
keys. Press Function key to advance to next window.
Figure 101
Press Up Key to Calibrate
22717
Figure 102
Measurement Mode
22718
Figure 103
Cal. Mode Drill Width
22779
Figure 104
Cal. Mode Row Count
22720