Great Plains YP1625 Operator Manual - Manual (Page 111)

Great Plains Manufacturing, Inc. Hydraulic Drive Operating Instructions 107
07/09/2009 401-226M
Varying Rates with Pre-set Function
The Great Plains Precision Population Controller allows
you to pre-set three different rates, and then change
rates on-the-go by toggling from one rate to another
rates with the Up or Down arrow keys.
Refer to Figure 128
1.
To enter the three pre-set rates, press Function key
until Pre-set Menu screen appears: Use Up-Down
arrow keys to toggle from manual mode to pre-set
mode.
Refer to Figure 130, Figure 130 and Figure 131
2.
Press Function key to move to the next pre-set
screen, and the Up-Down arrow keys to set the pre-
set rates.
Refer to Figure 132
3.
When in Pre-Set mode, the main operating screen
shows the pre-set rate currently being applied.
Note: When you are in Pre-set mode, the Up-Down arrow
keys only toggle between pre-set rates.
Figure 128
Preset Mode
22795
Figure 129
Preset Mode 1
22796
Figure 130
Preset Mode 2
22797
Figure 131
Preset Mode 3
22798
Figure 132
Preset Operating Mode
22799