Great Plains YP1625 Operator Manual - Manual (Page 23)

07/09/2009 401-226M
Great Plains Manufacturing, Inc. Operating Instructions 19
Operating Instructions
This section covers general operating procedures. Expe-
rience, machine familiarity and the following information
will lead to efficient operation and good working habits.
Always operate farm machinery with safety in mind.
Pre-Start Checklist
!
WARNING
Escaping fluid under pressure can have sufficient pressure to
penetrate the skin. Check all hydraulic lines and fittings before
applying pressure. Fluid escaping from a very small hole can
be almost invisible. Use paper or cardboard, not body parts,
and wear heavy gloves to check for suspected leaks. If an acci-
dent occurs, seek immediate medical attention from a physi-
cian familiar with this type of injury.
1. Carefully read “Important Safety Information” on
page 1.
2. Lubricate planter as indicated under “Lubrication”
on page 76.
3. Check all tires for proper inflation. See “Tire Infla-
tion” on page 118.
4. Check all bolts, pins and fasteners. Torque as shown
in “Torque Values Chart” on page 119.
5. Check planter for worn or damaged parts. Repair or
replace parts before going to the field.
6. Check hydraulic hoses, fittings and cylinders for
leaks. Repair or replace before going to the field.
7. Be sure hydraulic hoses are securely held out of the
ball swivel area at hitch. Failure to do so could cause
hoses to pinch requiring hose replacement.