Great Plains YP1625 Operator Manual - Manual (Page 40)

36 YP1225 and 1625 Great Plains Manufacturing, Inc.
401-226M 07/09/2009
Storage
Store the planter where children do not play. If possible,
store the planter inside for longer life.
1. Remove seed box. See “Changing the Seed Box or
Hopper” on page 23.
2. Thoroughly clean seed and seed treatment residue
from seed meters. See “Cleaning Out Meters” on
page 71, for more information.
3. If your planter is equipped with an optional fertilizer
tank, clean tank and application hoses. Be sure to
follow chemical manufacturer’s instructions when
handling chemicals.
4. Thoroughly clean pump following instructions in the
pump manual.
5. Unscrew caps on end of fertilizer booms and flush
them out. Drain completely and replace caps.
6. Remove any dirt and debris that can hold moisture
and cause corrosion.
7. Lubricate and adjust all roller chains.
8. Smear grease on exposed cylinder rods to prevent
rust. Add a brightly-colored tag at the hitch as a
reminder to de-grease the rods prior to next use (to
avoid any risk that congealed grease might damage
seals).
9. See “Lubrication” on page 76, for lubrication infor-
mation.
10. Inspect planter for worn or damaged parts. Make
repairs and service during off season.
11. Use spray paint to cover scratches, chips, and worn
areas on the planter to protect the metal.
12. Cover with a tarp if stored outside.
Note: Do not store optional bulk hopper outside on the
ground. Raise it on blocks, securing it in place to
prevent from falling over or blowing around by wind.
Store inside if possible.