SARGENT Profile Series v.G1.5 Cylindrical Locks - Manual (Page 9)

7
A7854B • 800-810-WIRE (9473) • www.sargentlock.com
Profile Series v.G1.5 Cylindrical Lock
05/06/09
A7854:B
Copyright
©
2009,
Sargen
t
Manufacturing
Company
,an
A
S
S
A
AB
LO
Y
G
roup
company
.All
right
s
reser
ved
.
Reproduction
in
whole
or
in
par
t
without
the
express
writ
ten
permission
of
S
AR
G
EN
T
Manufacturing
is
prohibited
.
1. Insert key, rotate 45° clockwise and hold
2. Depress lever retainer with push pin tool (provided).
6.7–Remove Outside Lever Only
Feed wires and
connector in
routed channel
Routed channel for
wood door only
Screws
partially
tightened
1A. If wood door, feed wires up through the
routed channel as shown.
1B. If metal door, feed wire and connector
through inside of door and out hole on
outside of door. *
2. Attach inside rose assembly and
spacer bushing and secure with
screws shown
6.6–Securing the Lock in the Door
1. With outside lever in hand, use standard
pliers to pull out cylinder retainer.
2. Remove key and cylinder
from lever.
3. Insert new cylinder.
4. Secure by pressing cylinder
retainer flush with the lever.
How to Change Cylinder
(if required)
Washers
(only 30-prefix)
Cylinder
retainer
Cylinder
Outside
lever
Key
Cylinder
spacer