SARGENT Profile Series v.G1.5 Cylindrical Locks - Manual (Page 3)

1
A7854B • 800-810-WIRE (9473) • www.sargentlock.com
Profile Series v.G1.5 Cylindrical Lock
05/06/09
A7854:B
Copyright
©
2009,
Sargen
t
Manufacturing
Company
,an
A
S
S
A
AB
LO
Y
G
roup
company
.All
right
s
reser
ved
.
Reproduction
in
whole
or
in
par
t
without
the
express
writ
ten
permission
of
S
AR
G
EN
T
Manufacturing
is
prohibited
.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced TV technician for help
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme avec la norme NMB-003 du Canada.
Warning 1
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Warning
!
To comply with “Fire Listed” doors, the batteries must be replaced with alkaline batteries only.
General Description 2
Specifications
Features
3
4
• Latch – 1/2" standard
3/4" throw fire-rated double doors
(optional) (41- prefix)
• Deadlocking latch
• Outside lever controlled by keypad,
or key retracts latch
• Inside lever retracts latch
• Locks furnished for 1-3/4" doors only
• U.L. Listed
IMPORTANT
• The Profile v.G1.5 Series provides enhanced software and hardware features.
• New v.G1.5 controllers replace v.G1 controllers. Product is still ordered as “G1-” prefix. Controllers are labeled “G1.5”
The SARGENT Keypad Cylindrical Lock is designed for areas which require stand alone authorized entry. It is a
self-contained microprocessor-controlled keypad with non-volatile memory. The keypad will hold a total of
100(LK)/2000 (G1-LU, G1-PK, G1-PA, G1-TU, G1-TP, G1-TA) different user codes. User codes “01” & “02” are
utilized for Master Code and Supervisory Code, respectively.
This product is operated by six (6) “AA” alkaline batteries.
• Non volatile memory
• Motor driven, battery operated
• Battery operated with 6 “AA” Alkaline
• Low battery alert–4 chirps after code entry
• External remote “request to enter”
• Master, Emergency or Supervisory code will unlock
door when low battery has expired
• 100 (LK) or 2000 (G1-LU, G1-PK, G1-PA, G1-TU,
G1-TP, G1-TA) users
• Programming done at keypad or with a PDA using
SofLink™ Plus software and a PC (G1-TA & G1-TP
require software)
• RF Fob and Proximity Card, Tag, Fob are optional
• Operates utilizing any two to six digits per code.
Digits may be repeated and codes may start with zero
• Cylinder override
• Entry of three wrong User Codes disables all codes
for ten seconds. Yellow LED on solid
• Piezo horn can be heard with each keystroke or
turned off by Master or Supervisory Code
• Last 15 transactions can be output to portable
print via infrared link (LK Only)
• Last 2000 (Except LK) transactions can be output to
PC via SofLink™ Plus Software