SARGENT Profile Series v.G1.5 Cylindrical Locks - Manual (Page 15)

NOTE: Connectors go on only one way.
Do not offset connector and be sure they are
completely sealed.
1. Insert two #8-32 screws (Fig. 2) through
top and bottom of inside escutcheon and
thread into outside escutcheon. Straighten
escutcheons and tighten securely, being
careful to avoid pinching wires.
NOTE: For RF Technology versions (G1-TU,
G1-TP, G1-TA), refer to Section 8 to install
through-bolt screws.
2. Slide the Inside Lever onto the tube.
13
A7854B • 800-810-WIRE (9473) • www.sargentlock.com
Profile Series v.G1.5 Cylindrical Lock
05/06/09
A7854:B
Copyright
©
2009,
Sargen
t
Manufacturing
Company
,an
A
S
S
A
AB
LO
Y
G
roup
company
.All
right
s
reser
ved
.
Reproduction
in
whole
or
in
par
t
without
the
express
writ
ten
permission
of
S
AR
G
EN
T
Manufacturing
is
prohibited
.
6.11–Mounting of Outside Escutcheon and Battery Installation
Fig. 1