Carrier FLOTRONIC II 30GN040-420 - Manual (Page 32)

Table 9 — Keypad Directory (cont)
SCHEDULE (cont)
SUBFUNCTION KEYPAD ENTRY DISPLAY COMMENT
3 PERIOD 1 (cont) FRI X Friday Flag (yes/no)
SAT X Saturday Flag (yes/no)
SUN X Sunday Flag (yes/no)
HOL X Holiday Flag (yes/no)
To toggle between inputs (Yes/No) Press: (no) or (yes)
4 PERIOD 2 PERIOD 2 Period 2 Time Schedule
5 PERIOD 3 ... 9 PERIOD 7
...
PERIOD 3 ...
PERIOD 7
Period 3 ... Period 7 Time Schedule
10 PERIOD 8 PERIOD 8 Period 8 Time Schedule
11 HOLIDAYS HOLIDAYS Define Calendar Holidays
DAT MM.DD Holiday Date 1
New = Unassigned Holiday Date
DAT MM.DD.NN Holiday Date 30
For example: To enter July 4th holiday press: 07.04.01 . Display shows Jul 04. For further information on the Schedule function and its
operation, refer to Schedule Function section on page 44.
SERVICE
To view and modify configurations, the password must be entered under the log on subfunction.
SUBFUNCTION KEYPAD ENTRY DISPLAY COMMENT
1 LOG ON AND LOG OFF PASSWORD Enter Password/Disable Password Protection
LOGGEDON Logged On
At this time, configurations may be modified. When finished viewing and/or modifying configurations, log out as follows:
LOGGEDON —
LOG OFF Disable Password Protection
EXIT LOG Logged Off/Enable Password Protection
2 VERSION VERSION Software Information
XXXXXXXX Version No. of Software (CESRXX)
The next 3 subfunctions provide the ability to modify configurations. Refer to separate Installation, Start-Up, and Service Instructions
supplied with unit for further information on changing configurations.
To change a configuration, enter the new configuration and press while on the correct configuration.
3 FACTORY
CONFIGURATION
FACT CFG Factory Configuration Codes
XXXXXXXX Configuration Code 1
XXXXXXXX Configuration Code 2
XXXXXXXX Configuration Code 3
XXXXXXXX Configuration Code 4
32