Tweco iCNC XT - Manual (Page 67)

iCNC XT
Manual 0-5299 OPERATION 5-9
5.3.9 Move Ahead Button
The MOVE AHEAD button is illuminated whenever a program is running. Pressing the Torch On/Off button will stop the machine and the Move
Ahead button will turn off. At this point, pressing the MOVE AHEAD button will cause the machine to move forward on programmed path without
cutting. Pressing the MOVE AHEAD button again will stop machine motion.
HINT: Turn speed potentiometer counter clockwise when using the Move Ahead feature for more precise control.
5.3.10 Stop / Backup Button
Press and release the STOP BACKUP button once durring the cutting process to stop the cutting sequence and halt machine motion. Press and
release the STOP BACKUP button again to move the machine in reverse, or backup on path. Pressing STOP BACKUP button again will stop motion.
HINT: Both the Stop-Backup and Torch on/off buttons work identically when running a cutting program. Pressing either button will allow cutting
to stop.