Tweco iCNC XT - Manual (Page 14)

iCNC XT
1-8 SAFETY INSTRUCTIONS Manual 0-5299
1.9 Declaration of Conformity China
Declaration of Conformity
Manufacturer: Victor Technologies International Inc.
Address: 16052 Swingley Ridge Road
Suite 300
Chesterfield, MO 63033 U.S.A.
Type of Equipment: Plasma Cutting Controller
Model /Number: iCNC XT
Serial Number: Serial numbers are unique with each individual piece of equipment and details description, parts used to manu-
facture a unit and date of manufacture.
Market Release Date: August 6, 2013
Classification: The equipment described in this manual is Class A and intended for industrial use.
!
WARNING
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low-
voltage supply system. There may be potential difficulties in ensuring electromagnetic compatibility in those locations, due to
conducted as well as radiated disturbances.
Application of Council Directive(s): The equipment described in this manual conforms to all applicable aspects and regulations of the ‘Low Volt-
age Directive’ (European Council Directive 2006/95/EC) and to the National legislation for the enforcement of this Directive.
The equipment described in this manual conforms to all applicable aspects and regulations of the “EMC Directive” (European Council Directive
2004/108/EC) and to the National legislation for the enforcement of this Directive.
The product is designed and manufactured to a number of standards and technical requirements. Among them are:
• CAN/CSA C22.2 number 61010-1
• UL 61010-1
• CB Scheme - EN61010-1/IEC 61010-1.
• CENELEC - EN61010-1.
Extensive product design verification is conducted at the manufacturing facility as part of the routine design and manufacturing process. This
is to ensure the product is safe, when used according to instructions in this manual and related industry standards, and performs as specified.
Rigorous testing is incorporated into the manufacturing process to ensure the manufactured product meets or exceeds all design specifications.
Victor Technologies. has been manufacturing products for more than 30 years, and will continue to achieve excellence in our area of manufacture.
Manufacturer’s Authorized Representative
Julian Chow V.P. Asia Pacific General Manager
Address: Victor (Ningbo) Cutting & Welding Equipment
Manufacturing Co. Ltd..
No. 58 West Jin Gu Middle Rd.,
Xia Ying Sub District,
Yinzhou District,
Ningbo, 315104
Date: January 16, 2014
Signature
Julian Chow
Full Name
V.P. Asia Pacific General Manager
(Position)