beautypg.com

Assembly procedure cutmaster 42 – Tweco 42 CutMaster Service Manual User Manual

Page 69

background image

ASSEMBLY PROCEDURE

CUTMASTER 42

Manual 0-5171

8-5 Assembly Procedures

8.04 Installing Main Control Panel and Clear Cover Sheet

1. Install 4 screws.
2. Plug harness into HF/QF connector
3. Plug harness into MB connector
4. Plug harness into SOURCE&TIP connector
5. Plug harness into DRIVE connector
6. Plug harness into U-D connector
7. Plug harness into WA connector
8. Plug harness into FAN connector
9. Plug harness into TRANF-IFB connector
10. Plug harness into WV connector
11. Plug harness into D-PORT connector
12. Plug harness into OT connector
13. Plug harness into PRESSURE connector
14. Plug harness into GUN&TEST connector
15. Install clear protective sheet.

See also other documents in the category Tweco Equipment: