SONIQ DVR150 - Manual (Page 33)

Entering the Playback Mode
NORMAL PLAYBACK MODE
In the playback mode, this unit is works the same as a regular DVD player. The way to enter the
playback mode is as follows:
Connect this unit with the TV set (Refer to “System Connection” for details), turn on the TV set
and switch it to the AV input mode.
Plug in the unit, then press [POWER] button to turn it on.
Press [OPEN/CLOSE] button to open the disc tray.
Load the disc to be played as shown in the illustration.
When loading a disc, the smooth side should face down and the side with silk-screen should face up.
Press [OPEN/CLOSE] button to close the disc tray, then the system starts playing.
According to different discs, the system will probably enter the Title Selecting Playback mode or Menu
Playback mode. If this condition appears, the disc will not continue to play (please refer to the
following text).
If system is in other working mode, please press [PLAY] button to enter the playback mode.
If you press [PLAY] button, the TV screen displays “ ”. Please exit current working mode first,
and then press [PLAY] button again.
When writing or erasing, pressing [PLAY] button will be invalid.
If there is no disc in the loader or the disc is not supported by this unit and it has been damaged, in such
case, pressing [PLAY] button will be invalid.
When playing a DVD disc, it will enter menu playing mode. The menus of different discs are
different. In general, you can select the playing language, set the subtitle language and so on by
that menu. To perform some operations, you only need to highlight the corresponding item by
cursor buttons and confirm by [ENTER] button.
When playing certain VCD disc, a list of tracks will appear on the menu. You can select a track by
number or cursor buttons, then press [ENTER] button to play the selected track.
During play, you can open the disc menu by pressing [MENU] button.
This operation is only available for DVD disc. During
play , if you want to select certain title to play, you can
press [TITLE] button. Then the screen will display the
title icons list, shown as the right figure. You can
highlight an icon , then press [ENTER] button to play it.
Playback from the Menu Displayed
Playback from the Title Displayed
The title menu for different DVD discs may be differently.
Not all DVD discs support title menu. When title menu is not available, pressing
[TITLE] button will show invalid.
1
2
3
4
5
6
7
1
2
3
1 2
3 4
28
Note