Quick start recording guide, Manual recording(continued), One touch recording (otr) – SONIQ DVR150 User Manual

Page 22

Manual Recording(CONTINUED)

SOURCE

* SOURCE

Front CVBS : Front panel composite video and audio inputs

Front S-VIDEO: Front panel S-video and audio inputs

Rear CVBS : Rear panel composite video and audio inputs

Rear S-VIDEO : Rear panel S-video and audio inputs

DV : Front panel DVD input

SCART: Rear panel SCART input

Tuner : Rear panel TV turner input

QUALITY

HQ : best definition, a single-side DVD disc can record about one hour program.

SP : better definition, a single-side DVD disc can record about two hours program.

EP: good definition, a single-side DVD disc can record about four hours program.

SLP : general definition, a single-side DVD disc can record about six hours program.

* QUALITY

TRICK

Stop: Stop the recording

Pause : Pause the recording

Record: Start recording

* TRICK

Set “TRICK” item to “Record”, then press [ENTER] button to start recording.

By the “TRICK” item, you can pause or stop the current recording.

T h e s o u r c e v a l u e m u s t m a t c h t h e p o r t t h r o u g h w h i c h t h e e x t e r n a l s o u r c e s i g n a l i s i n p u t .

One Touch Recording (OTR)

This function can make you set the end time of the recording. When the time is up, the recording
will stop automatically.

Enter the recording mode and start recording.

According to the desired time, press the [RECORD] button once or more.

Pressing [RECORD] button once, the length of the recording time will extend for 30 minutes. If it
exceeds the disc recordable time, the system will cancel OTR function and switch to nornal recording
mode.
If the OTR process is paused or stopped, the system will cancel the OTR.

To Control the DV Camera Recorder by this Unit

This unit may control the DV camera recorder through the 1394 serial interface, that is, when using

DV as input source, you may fulfill the operations of playback, pause, etc. To the DV through the

remote control of this unit.

Properly connect the DV (Please refer to “System Connection of Recording External Signals”for
details) and make it work normally. Then set the “Source” item in the control menu bar of this unit
to DV.
When pressing the [STOP] button, if this unit is in recording mode, the recording will stop and the
DV cannot be influenced: on the other hand, if the unit is not in recording mode, this unit can not be
influenced and the DV will stop.

This operation can make the recording control bar disappear.

Note

* SOURCE

QUICK START RECORDING GUIDE