Entering disc operation mode, Operations, Exiting the disc operation mode – SONIQ DVR150 User Manual

Page 32: Summarization, Press [disc op] again to exit

Summarization

Entering Disc Operation Mode

Disc operations refer to certain functions about the disc in the loader, including viewing disc information,
finalizing a disc, erasing disc content, erasing the title, lock/unlock the disc and so on.

If you load unfinalizing DVD R or DVD RW disc, you can enter this mode. There are two ways to enter this mode.

During play, you can enter this mode by pressing [DISC OP] button. After entering the mode, please
press [ ] button to display the control main menu, as shown in the following figures.

Display Title List picture by the methods introduced at chapter “Playing and Processing the Disc Recorded
by this Unit”, and press [ ] button continuously until the icon

appears, then press [ ] button.

PAL

DVD

EDIT

Operations

Play: Highlight item “Play” in the menu, and then press [ENTER] button.
Rename disc:

Highlight item “Rename disc”, and press [ENTER] button, then
a keyboard menu will appear. You can rename
the disc through the methods introduced in chapter “Playing and
Processing the Disc Recorded by this Unit”.

Finalize disc/Make compatible:

“Finalize disc” is valid for DVD R disc, the disc can be played in normal DVD player, but can not

record new contents. Highlight item “Finalize disc” and press [ENTER] button, then a dialogue will
open shown as the right figure, please highlight “OK” key in the
dialogue, then press [ENTER] button to start this operation.

These operations will occupy some time, please wait for a few minutes.

Lock disc: “Lock disc” is valid for DVD RW. This operation can protect the recorded contents from
being deleted. If you want to record new contents in the disc, you must unlock the disc. You can
highlight item “Lock disc” and press [ENTER] button to lock or unlock the disc. If the disc is locked,
this operation will unlock the disc, otherwise it will lock it.

Erase disc: This operation is only available for DVD RW disc. Highlight item “Erase disc” and press

[ENTER] button, then the system will start erasing disc contents. This operation will take a awhile.

When erasing, any other operations can not be proceeded, including standby. Once the operation

starts, it cannot be cancelled midway. Please do not unplug the unit midway. Otherwise, the disc will

be probably damaged.

Record a new title /Overwrite disc: These operations can perform recording function. “Record a new title”
can add a new title when recording, and “Overwrite disc” can overwrite all the contents in the disc .
You can highlight “Record a new title” or “Overwrite disc” item, and press [ENTER] button to start recording.

Press [DISC OP] again to exit.

Exiting the Disc Operation Mode

Play

Rename disc

Finalize disc

Record a new title

PAL

DVD

EDIT

When playing unfinalizing DVD+R

PAL

DVD

EDIT

Play

Rename disc

Erase disc

Record a new title

Overwrite disc

Lock disc

When playing DVD+RW

Play

Unlock disc

PAL

DVD

EDIT

When playing locked DVD+RW

Disc name:

MY DVD

(

)

Spsce

Caps

BkSp

Delete

Clear

Exit

the key board menu by

which you can rename the disc

Warring: this operation will finalize the
DVD+R disc in loader. If finalized, it can
not record new content any more. Are
you sure to continue?

Yes

Finalize disc