SONIQ DVR150 - Manual (Page 20)

QUICK START RECORDING GUIDE
Summarization
Viewing the inputted source
A f t e r e n t e r i n g t h e r e c o r d m o d e , t h e s o u r c e s i g n a l w i l l b e s h o w n o n t h e T V s c r e e n .
W i t h t h i s f u n c t i o n y o u c a n g e t a p r e v i e w o f t h e e x t e r n a l s i g n a l s
Selecting the signal to view
Connect the system (please refer to “System
Connections-System Connection of recording
external signals”for details). Make sure the
source equipment works properly, and output the
signal intended for recording.
Turn on this unit, then press [SOURCE] button to
enter record mode.
Press [DISPLAY] button to display the record
control menu, then highlight the “SOURCE” item.
Next, press the [ENTER] button to access the source drop down list shown as the above figure
Select the desired source from the list, press [ENTER] button, and then the TV screen will show
the corresponding picture.
Pressing [SOURCE] button can expediently view the external signals one by one.
The sequence of selecting the external signal is shown in the following.
RECORD (DVD+RW)
MODE
SOURCE
QUALITY
REC TO
New Title
Front S-VIDEO
SP
DVD-VIDEO
TRICK
TITLE
CHAPTER
TIME
Stop
01/01
01
0:02:45/2:07:09
Front CVBS
Front S-VIDEO
Rear CVBS
Rear S-VIDEO
DV
Record control menu
The source drop down list
Please refer to “System Connections-System Connection of Recording External Signal ” for
the positions of the input signals sources on this unit.
1
2
3
4
5
15
Playback MODE TV INPUT
Front
CVBS
Front
S-VIDEO
Rear
CVBS
Rear
S-VIDEO
DV SCART
This unit has various external input signal terminals including S-video input, composite video input,
TV tuner input, DVD input, and stereo audio input. You may record using any of these video and
audio input signals.
Recordable discs compatible with this unit are DVD RW and DVD R. There are four recording
modes to be selected, including SLP (6 hours), EP (4 hours), SP(2 hours) and HQ (1 hour).
This unit also incorporates time recording function which you can prepare a recording schedule
before hand and it will record your desired programs according to the pre-set schedule.
± ±