Powers 450-410P HydroPanel II Shower System with HydroGuard PB410 Pressure Balancing Valve - Manual (Page 4)

USA: Phone: 1.800.669.5430 • Fax 1. 847. 229 . 0526 • www.powerscontrols.com
Canada: Phone: 1.888.208.8927 • Fax 1. 888. 479.2887 • www.powerscontrols.ca
IS-P-450-PB410 0806 EDP# 6512312 © 2008 Powers
NOTE: AFTER COMPLETING REPAIRS,
CHECK DISCHARGE TEMPERATURE.
RESET IF NECESSARY.
WARNING: FAILURE TO PERFORM THIS
OPERATION COULD RESULT IN UNSAFE
DISCHARGE TEMPERATURE, WHICH MAY
CAUSE INJURY OR DEATH.
Parts List ■
1
2
3
4
5 7
6
Fig. 6
Parts List
Item Part Number Description
1 420-049 HANDLE KIT
2 410-022 TRIM PLATE KIT
3 220-054 SLEEVE KIT
4 410-410 BONNET/STEM KIT
5 900-240 CARTRIDGE
6 900-050
CHECKSTOP REPLACEMENT
KIT
7 N/A BODY
Warranty
■
The Seller warrants that the equipment manufactured by it and covered by this order or contract is free from defects in material and workmanship and, without
charge, equipment found to be defective in material or workmanship will be repaired, or at Seller’s option replaced F.O.B. original point of shipment, if written
notice of failure is received by Seller within one (1) year after date of shipment (unless specifically noted elsewhere), provided said equipment has been properly
installed, operated in accordance with the Seller’s instructions, and provided such defects are not due to abuse or decomposition by chemical or galvanic action.
THIS EXPRESS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, GUARANTEES, OR REPRESENTATIONS, EXPRESS OF IMPLIED. THERE ARE
NO IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. The Seller assumes no responsibility for repairs made on the
Seller’s equipment unless done by the Seller’s authorized personnel, or by written authority from the Seller. The Seller makes no guarantee with respect to material
not manufactured by it.
IS-P-450-PB410.indd 4 5/5/08 2:00:23 PM