Names and functions of parts, Main panel, Power switch and indicator – Nipros ES-600 Operating Instruction User Manual
Page 4: Tally indicator, Mic on/off switch, Tripod adaptor plate, Tripod screw and pin
![background image](/manuals/592684/4/background.png)
Names and Functions of Parts
4
Camera Adapter ES−300
メインパネル
Main panel
コネクタパネルの INTERCOM HEADSETコネクタ(キャノン4P)に接続されたヘッドセットDL400の MIC,
H.P(ヘッドホン)およびサイドトーンの音量レベルを調整します。
INTERCOM HEADSET Microphone, Headphone and Side tone volumes
Adjusts the audio levels of the microphone, the headphone and the side tone of the Intercom headset
DL-400 connected to the INTERCOM HEADSET connector (XLR 4-pin) on the connector panel.
POWER switch and indicator
電源をON/OFFするスイッチです。電源スイッチがONになっている時に点灯します。
Turns the power on and off. The indicator lights up when the power switch is on.
ベースステーションDS-560からのタリー信号を受けて点灯します。
TALLY indicator
Lights up when receiving the tally signal from the Base Station DS-600.
MIC ON/OFF switch
INTERCOM
SIDE
TONE
CAMERA ADAPTOR
ES-300
Turns on/off the intercom headset microphone.
インターカムヘッドセットのマイクを ON/OFFします。
Tripod Adaptor plate
Fits with the Sony tripod base, VCT-14, VCT-U14.
三脚ベースSONY製VCT-14,VCT-U14に装着できます。
Tripod Screw and Pin
Fix to the bottom of the camcorder.
カムコーダーの底面へ取り付けます。