Pr.2, S, r, E, u – Kenco Engineering SmartSonic Transmitter (Integral) User Manual
Page 9
Page 9
Initial Set-up Program Pr.23 (Measurement Range)
This program allows you to set the transmitter to either Standard or Short Range. The Standard range is 49.22ft., while
the Short Range is 16.41ft. If your Tank Height is less than 16.41ft. select the Short Range, as this will give you better
accuracy.
Press / Action
Display
Description
Pr.2
Pr.2
Pr.2
Pr.23
3
3
3
Program #23
or
S, r
S, r
S, r
S, r
Cycle between Standard (S), and Short (r). DO
NOT select COdE.
Accepting the new “Application Type” Value
After a brief time
Pr.2
Pr.2
Pr.2
Pr.23
3
3
3
Initial Set-up Program Pr.22 (Flume Type)
This program is only available if you selected Flow in Program 24. This is where you select either European or U.S.
Flume/Weir types.
Press / Action
Display
Description
Pr.2
Pr.2
Pr.2
Pr.22
2
2
2
Program #22
or
E, U
E, U
E, U
E, U
Cycle between European (E) and U.S. (U)
Flume/Weir types
Accepting the new “Application Type” Value
After a brief time
Pr.2
Pr.2
Pr.2
Pr.22
2
2
2