E-flite Ultimate 20-300 10 ARF User Manual

Page 8

E-flite Ultimate 20-300 Assembly Manual



3. Position the hinges in the pre-cut slots in the

aileron. Slide the hinges into the aileron up to the

mark made in the previous step.



4. Slide the aileron in position with the hinges

inserted in the slots of the wing. Check that the end

of the aileron is aligned with the wing tip using a

straight edge.



5. Make sure the aileron does not bind at the center

of the wing.



6. Use a hobby knife with a #11 blade to set the

gap between the aileron and wing. The blade should

barely slide between the two surfaces. Doing so will

allow achieving the control throws listed with the

smallest gap possible.